The correct replacement ball for a Curt Pintle Hook Combo, # C48200, with a 2-5/16 inch ball is the Pintle Hitch Ball, # C48830.
The Tow Ready Ball, # 63019, fits pintle hitch # TR63042.
If you were towing a trailer with a lunette ring, you would not remove the ball. The ball is what retains the ring and the top part of the pintle hitch keeps it from jumping up and off of the ball. view full answer...
Though I may have another option available for you, the B&W Tow & Stow 3-Ball Mount # BWTS30049B is not available with a pintle hitch as of yet.
With that being said, there are actually no current options available for the 3" hitches being used, so you will need to use a reducer, like the # 58552, if you do not already have one. This will allow you to go one of two ways.
First will be the Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches # C45908. This is rated to 20,000 pounds and... view full answer...
It sounds like you are referring to the sleeve in which case you can use the Replacement Pintle Sleeve for Convert-A-Ball Pintle Hook Combos part # PS which works with the Convert-A-Ball Pintle Hook Combos part # PH1 and part # PH2.
If this is not what you are referring to them please send me a photo that way I can help identify it for you. view full answer...
The Replacement Hitch Ball Platform for Pro Series Adjustable 2-Ball Mount - 14K # PS63076 will be compatible with the Pro Series Adjustable Pintle Hook Mounting Plate for 2" Hitches - 14K lbs # 63072 or can be used as a replacement for the # 63071. view full answer...
Yes you sure can!
The replacement pins that are used to adjust the hitch ball and pintle hook on the Curt # C45910-15-20 are found on our site listed as part # C45925.
If you would rather go with a locking pic set I recommend the Curt Lock Set # C23556. This will replace one of those adjustment pins and then also be used to lock the shank of this ball mount to your trailer hitch receiver. view full answer...
I do have an option for you but the spring is not a replaceable part on the Buyers Products 15 Ton Swivel Type Pintle Hook part # 337BP100A. If the spring needs replaced you will need to purchase a new unit which we do offer. view full answer...
The Tow Ready Pintle Hitch Ball you referenced, part # 63019 would work just fine with your Equal-i-zer weight distribution hitch. As you said, those systems use a ball with a 1-1/4 inch diameter with a shank no longer than 2-3/8 inches. You'll want to make sure that the fully loaded and ready to tow tongue weight of your TT (plus the weight of anything stowed behind the rear axle of the tow vehicle) doesn't exceed the capacity of the Equal-i-zer system you're using. view full answer...
We do carry the replacement 7/8 inch diameter pin for your Convert-A-Ball Cushioned, 6-Way, Multi-Hitch Ball Mount, # CAB-6W. You will need replacement draw pin # CAB-6WPIN. Given the low cost of this item might I suggest getting a couple just in case! view full answer...
A straight coupler won't work on the trailer receiver box dimensions you give of 5.5 x 3.5. An alternative option would be the Demco Trailer Coupler w/ 5-Position Adjustable Channel - eZ-Latch # DM6125-81 which would need to be welded in position, but would give you the adjustable height for your coupler. view full answer...
If you have the Dexter PQ Style Air Brakes then the 12-1/4" x 4" Brake Shoe # BP22-015 is what you are needing. If you can get me a part number for your brakes or send in a picture of your setup then I may be able to positively confirm this on my end but without either you will need to determine this on your end. I have attached a review video you can reference as well. view full answer...
Thank you for the clear description and photo of your Hudson utility trailer and its hubs.
You have what appear to be what we call 5-spoke utility hub/drums, part # 8-174-5UC3, shown on the linked page. With such hubs the wheels rest on the hub's outer rim. This hub is rated for use on 6K and 7K axles.
In order to change these to more standard RV hub/drums you will need to know the inner and outer bearing parts. Any alternate hub has to use the same bearings or you will need to change... view full answer...
Go To Results